TP-Link Archer MR600 AC1200 4G LTE Advanced Cat6 Gigabit Router

TP-Link's First 4G+ Router – supports 4G+ Cat6 to boost the data speeds of up to 300 Mbps
Plug a SIM card and play – no configurations needed, compatibility of SIM cards in 100+ countries are assured by years of field tests
MU-MIMO supported – simultaneous data streams increase WiFi throughput and network efficiency.
Supports TP-Link OneMeshTM – co-works with TP-Link OneMesh products to create a flexible and cost-efficient Mesh network
Better Signal for Connections Everywhere – enjoy stable and efficient connections to every device thanks to the two external LTE antennas
Full Gigabit Ports – provides reliable wired connections for bandwidth-intensive devices such as game consoles and STB
Wi-Fi router mode – plug an Ethernet cable into the LAN/WAN port for flexible access if you can't get a 4G connection
Easy setup and management all by Tether app

Fast Wi-Fi Where You Need It
Searching for a stable and flexible network connection? Archer MR600 provides both as a 4G+ LTE WiFi router. Compared with traditional WiFi routers, it integrates 4G+ and WiFi technology, meaning MR600 acts like a phone and needs only a Nano SIM card to get internet access. Experience stable WiFi and share it with your family and friends wherever you are.

Boost Your Broadband Speeds with Stable 4G+ Internet
Whether you’re bingeing HD movies, downloading entire libraries of data, or gaming online, MR600’s boosted 300 Mbps download speeds fulfills your devices’ needs. Such fast broadband and reliable internet access is thanks to its 4G+ Carrier Aggregation technology which combines different carrier signals for even faster bandwidth.

Share Powerful Dual Band WiFi with Everyone
MR600 creates a reliable and blazing-fast network powered by 802.11ac Wi-Fi technology. The 2.4 GHz band delivers speeds up to 300 Mbps for everyday tasks like emailing and web browsing, while the 5 GHz band delivers speeds up to 867 Mbps—ideal for HD video streaming and lag-free online gaming.

Vast WiFi Coverage Throughout Your Home
Connect to the internet in every room with an expansive and strong AC1200 dual band WiFi. MR600’s Beamforming concentrates signals towards your connected devices. Its Power Amplifier and Low Noise Amplifier also amplify sending and receiving capabilities, both of which boost your signal coverage.

More Data Streams with MU-MIMO Technology
MU-MIMO technology enables multiple devices to connect to the internet at the same time, reducing wait time, increasing WiFi throughput for every device, and boosting the efficiency of each data stream. With MU-MIMO supported, Archer MR600 provides users a faster network, less interference, and lower latency.

Seamless Roaming with TP-Link OneMesh
Enjoy a stable, whole-home WiFi connection even while you’re moving around your home. MR600 works with TP-Link OneMesh products to create a seamless network under a single Wi-Fi name.

Full Gigabit Ports for Fast Connections
Full Gigabit Ethernet ports provide reliable, warp-speed connections for high-intensive wired devices such as your smart TV, game console, NAS, and more. MR600 also provides a WAN port compatible with cable, fiber, and DSL modems. When it’s set as a wireless router, its 3G/4G connection works as a backup to provide a solid internet connection for you.

Easy Setup and Management
Set up Archer MR600 in minutes thanks to its intuitive web interface and the powerful Tether app. Tether also lets you manage its network settings from any Android or iOS device, including parental controls and access control.

Specification

Interface
1 x 10/100/1000 Mbps LAN/WAN Port
3 x 10/100/1000 Mbps LAN Ports
1 x Nano SIM Card Slot

Button
WPS/Reset Button, WiFi On/Off Button, Power On/Off Button

External Power Supply
Power Adapter: : Input Power 100-240v~50/60 Hz 0.6A
Output parameter 12VDC 1.5A

Dimensions ( W x D x H )
202 x 141 x 33.6 mm (7.95 x 5.55 x 1.32 in)

Antenna
2 x Detachable 4G LTE Antennas

Wireless Standards
IEEE 802.11a/n/ac 5 GHz, IEEE 802.11b/g/n 2.4 GHz

Frequency
2.4 GHz and 5 GHz

Signal Rate
300 Mbps at 2.4 GHz, 867 Mbps at 5 GHz

Reception Sensitivity
5 GHz: 11a 54M: -77 dBm
11ac HT20: -73 dBm
11ac HT40: -68 dBm
11ac HT80 : -64 dBm
11n HT20: -77 dBm
11n HT40: -73 dBm
2.4 GHz: 11g 54M: -74 dBm
11n HT20: -72 dBm
11n HT40: -69 dBm

Wireless Functions
Enable/Disable Wireless Radio, Wireless Schedule, WMM, Wireless Statistics

WAN Failover
Yes

Wireless Security
64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions

Transmission Power
< 20 dBm (2.4 GHz), < 23 dBm (5 GHz)

Network Type
4G: FDD-LTE: B1/B3/B5/B7/B8/B20/B28 (2100/1800/850/2600/900/800/700 MHz)
TDD-LTE: B38/B40/B41 (2600/2300/2500 MHz)
3G: DC-HSPA+/HSPA/UMTS: B1/B5/B8 (2100/850/900 MHz)

Carrier Aggregation:
B1+B3/B5/B7/B8/B20
B3+B1/B3/B5/B7/B8/B20/B28/B38/B40
B5+B1/B3/B5/B7/B40
B7+B1/B3/B5/B7/B8/B20/B28
B8+B1/B3/B7
B20+B1/B3/B7
B28+B3/B7/B40
B38+B38
B40+B40
B41+B41

Quality of Service
Bandwidth Control

Security
DoS, IPv4 SPI Firewall, IPv6 Firewal, IP and MAC Address Binding, Access Control

WAN Type
Dynamic IP/Static IP/PPPoE/PPTP(Dual Access)/L2TP(Dual Access)

Management Features
TP-Link Cloud, Local Management, Remote Management

DHCP
Server, DHCP Client List, Address Reservation

Port Forwarding
ALG, Virtual Server, Port Triggering, UPnP, DMZ

Dynamic DNS
TP-Link, DynDns, NO-IP

VPN
PPTP VPN, OpenVPN

Access Control
Parental Control, Local Management Control

Protocols
IPv4, IPv6

Guest Network
2.4 GHz Guest Network x 1, 5 GHz Guest Network x 1

Certification
CE, RoHS

Package Content
4G+ Cat6 AC1200 Wireless Dual Band Gigabit Router Archer MR600
Power Adapter
RJ45 Ethernet Cable
Quick Installation Guide